Revised by R. Robinson
Issue AV1.13 8 June 2006
59
4 = Hunt with Busy Reminder Tone
Related Zones.
,
,
Items 08:Ring MTD-N Ringing method :night period.
This Item is similar to the previous Item, except that it is for the Nighttime and not for the Daytime
Related Zones.
,
,
See next page for ring method explanation.
Common Audio: All assigned stations will ring together.
Linear: The incoming line will always try to ring the first assigned station. If it is busy it will go to the second
assigned station; if it is busy it will go to the next ext, etc. until it finds a free ext and rings it.
Circular: The first incoming call will ring to the first assigned station, the second call will ring to the second
assigned station, etc. If the station is busy it will ring to the next available assigned station.
Hunt: This is similar to linear with a major difference. If an assigned station is free but does not answer, the
system will ring both that station and the next assigned station after the time in
has been reached. If
both do not answer in the next period (
) it will also ring the third assigned station. This process
continues until the call is terminated. If an ext is to ring and is busy, it can be programmed to receive BRT
once only.
Zone 605
CO Lock
(CO = 1 of ? Lines)
Default value =
00000000000000
Range =
N/A
This zone allows the CO line to be locked (restricted) for incoming, outgoing or both ways.
0 = Unlock incoming
Unlock outgoing
1 = Unlock incoming
Lock outgoing
2 = Lock incoming
Lock outgoing
Turn CO LED off
3 = Lock incoming
Lock outgoing
Turn CO LED on
Related Zones.
None
Zone 606
CO Fre.
(CO= 1 of ? lines)
Default value =
0000000000000000000
Range =
N/A
This zone allocates the Frequency of the ringing signal that will be used by each CO line.
One of nine frequencies can be selected for each line as below:
0 = Frequency according to the station ringing frequency (see Administrators Manual)
1 = Frequency 1 :- Lowest frequency……..to……..
9 = Frequency 9:- Highest frequency
Related Zones.
None
Zone 607
DISA G
(Group = 1 of 7 groups 1,2,3,4,5,7,8,)
Default value =
00 00 00 00 00
Range =
N/A
This zone allocates the stations to a Single Digit Dialing Group.
Eight stations can be assigned to each of the seven groups. Group 6 cannot be used as this is used by stations
to signify an intercom call. Groups 9 and 0 cannot be used as these denote the access numbers for the
Operator and a free CO line.
Group 1 = Single digit 1 dialed. All stations in this group will ring if a 1 is dialed for intercom
Group 2 = Single digit 2 dialed. All stations in this group will ring if a 2 is dialed for intercom
….
….
Group 8 = Single digit 8 dialed. All stations in this group will ring if an 8 is dialed for intercom
These groups are also used to create “In-Dial” groups. These will ring to selected incoming In-Dial
numbers.
THERE ARE 8 POSSIBLE GROUPS FOR INDIAL RINGING. THESE ARE PROGRAMMED IN
GROUPS 01 ~ 08 AND CORRESPOND TO SETS 01~08 IN ZONES 610 AND 611.
