Arista DCS-7020TR-48, Быстрый старт

Страница: 19 / 52

Chapter 3: Rack Mounting the Switch Four-Post Rack Mount
Quick Start Guide: 7000 Series 1 RU-Gen 3 Data Center Switches 15
Step 2 Attach rail to the right rear rack post by inserting rod-end rack plugs into post slots
(
Figure 3-10, Inset A ). The slide assembly must be inside the right posts, relative to the left
rack posts.
If the rack plugs were previously removed, use bolts to attach the rail to the rack.
Step 3 Attach the slide end of the rail to the front post by extending the rail end past the post, then
contracting the rail while guiding the rack plugs into the post (
Figure 3-10, Inset B ).
Step 4 Repeat step 1 through step 3 for the left posts. Ensure the rails are on the same horizontal
level.
Figure 3-10: Attaching the Rails
Inset A
Inset A
Inset B
Inset B