Chapter 1
Overview
The following topics are covered in this section:
•
•
Receiving and Inspecting the Equipment
•
•
•
Obtaining Technical Assistance
•
The Arista 7060X and 7260X Series are a range of 1RU and 2RU high performance 25G, 40G,
100G and 400G high density, fixed configuration, data center switches with wire speed layer 2 and
layer 3 features, and advanced features for software driven cloud networking. The Arista 7060X
and 7260X deliver a rich choice of interface speed and density allowing networks to seamlessly
evolve from 10G/40G to 25G/100G and 200G/400G. With support for advanced EOS features these
switches are ideal for large scale cloud, traditional and fully virtualized data centers. The Arista
7060SX2-48YC6 and 7060CX2-32S provide support for IEEE 25GbE and support a shared packet
buffer pool of 22 MB with a consistent low latency of 450ns.
1.1
Scope
This guide is intended for properly trained service personnel and technicians who need to install the
following Arista Networks Data Center Switches:
DCS-7060CX-32S
DCS-7060CX2-32S
DCS7060PX4-32
DCS7060DX4-32
DCS-7060SX2-48YC6
DCS-7060DX4-32S
Important: Only qualified personnel should install, service, or replace this equipment.
Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.
1.2
Receiving and Inspecting the Equipment
Upon receiving the switch, inspect the shipping boxes and record any external damage. Retain
packing materials if you suspect that part of the shipment is damaged; the carrier may need to
inspect
them.
If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any
accessories that may be packaged in the same box as the main unit.
Inspect the packing list and confirm that you received all listed items. Compare the packing list with
your purchase order.
provides a list of components included with the switch.
1.3
Installation Process
The following tasks are required to install and use the switch:
1
