manualshive.com logo in svg

Arista 7060 Series, Быстрый старт

Поделиться
Скачать
Arista 7060 Series Скачать руководство пользователя страница 30

Table 6: Switch Indicators LED States (Front)

LED Name

LED State

Device Status

Blinking Green

System is powering up.

Green

Normal operations. Due
to power supply and fan
redundancy, this LED will
remain green if a single fan or
power supply is missing or in a
failed state.

Blue

The locater function is active.

System Status LED

Amber

Two or more fans (any
combination of fan modules or
PSU fans) are disconnected
or malfunctioning. The switch
will automatically execute a
“graceful shutdown” shortly.

Green

All fan and power modules are
operating normally.

Amber

Single fan module is removed
or malfunctioning. It is
also amber when a PSU is
completely removed or has a
stuck fan rotor.

Fan Status LED

Red

Two or more fans (any
combination of fan modules or
PSU fans) are disconnected
or malfunctioning. The switch
will automatically execute a
“graceful shutdown” shortly.

Green

PSU is functioning and fully
operational. AC is present,
Aux output is ON, and Main
output is ON.

PSU [1:2] Status LED

Off

PSU has been removed or is
not operating properly due to
AC cord being unplugged, its
fan rotor being stuck, or an
internal fault.

26

Содержание 7060 Series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды