ARIMA SW500, Руководство пользователя

Страница: 33 / 58

2
BIOS Setup
s
tarting the
bios s
etup
The PhoenixBIOS is immediately activated every time you power on the system. The BIOS
reads the system information contained in the CMOS and begins the process of checking the
system and configuring it. After configuring the system, the BIOS follows the Boot Order to
seek an operating system. The BIOS then turns control of the system over to the operating
system.
The CMOS information that determines the system parameters is changed by entering the
BIOS Setup utility:
1. Power on the System.
Note: Normally, the only visible POST (Power On Self Test) routine is the memory test.
2.
As the memory is being tested, you can access the BIOS Setup Utility by pressing
the <F2> key when “Press F2 to enter SETUP” appears briefly at the bottom of
the screen.
From the main menu of the BIOS Setup Utility, you can access the other setup screens, such
as the Security and Power menus.
u
sing the
bios s
etup
u
tility
Navigating through the BIOS Setup Utility is straight forward. Use the arrow keys to highlight
items, press <Enter> to select items in menus, and press <Esc> to quit. The following table
provides more details about how to navigate in the Setup program using the keyboard.
Up Arrow Key Moves to the previous item.
Down Arrow Key Moves to the next item.
Left Arrow Key Moves to the previous menu.
Right Arrow Key Moves to the next menu.
<Esc> key, <Alt-X> In submenus this exits the submenu.
In the BIOS main menu this quits without saving changes.
<Enter> Key, <Tab> Selects the highlighted item. When available, a pop-up list or
submenu displays.
<PgUp> Key, + Key Increases the numeric value or make change.
<PgDn> Key, – Key Decreases the numeric value or make change.
<F1> Key Displays general help on setup navigation keys.
Press <F1> key to view a small help window that describes
the appropriate keys to use and the possible options for the
highlighted item. To exit the Help Window, press <ESC> or <F1>
key again.
<F9> Key
Loads default values for the page.
<F10> Key Loads previous values for the page.