arietta DKI001MX 36, Инструкция по использованию, уходу и установке

Страница: 22 / 52

22
Use
And Care Instructions
Hood maintenance
•
Clean with a damp, soapy cloth and dry with a clean cloth. A glass cleaner may also be used.
ATTENTION: Do not wet the control panel.
•
Do not use a steel wool pad; it will scratch the surface.
•
To clean the stainless steel surface, use warm sudsy water, stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless
steel surface.
Change lamp bulbs:
•
Remove the inner lamp lens cover by inserting a small flat blade screwdriver into each of the three slots
and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp assembly).
W ear gloves, do not touch with your bare fingers.
•
Grasp the bulb and pull it straight out.
• Replace with 120 volt, 40 watt halogen bulbs with a G9 base.
•
Replace inner cover by inserting the three retaining tabs into the three slots and pressing them firmly in
place.
inner lamp lens cover.
Outer trim ring
(lamp assembly)
Do not remove
Removable inner
lamp lens cover
Bulb
Make sure the tabs are inserted into the slots.
Remove the damaged light bulb and replace it
with a new bulb rated 120 V, max 40 W, G9 base.