8
Complete Installation
Install duct covers
• When using both upper and lower vent covers, push lower
cover down onto hood and lift upper cover to ceiling and
install with two mounting screws.
NOTE:
For vented installations, the upper vent cover may be
reversed to hide slots.
B
A
C
A. Bracket
B. 4 x 8 mm screws
C. Vent covers
• Secure the bottom of the duct with 2 - 4 x 8 mm screws.
• For non-vented (recirculating) installations only, install charcoal
filters over metal grease filter. See the “Mainteinance” section.
• Install metal filters. See the “Mainteinance” section.
To get the most efficient use from your new range hood, read the
“maintenance” section.
Keep your Use, Care, and installation Guide close to range hood
for easy reference.
Description of the Hood
6
5
4
1
3
2
1. Controls
2. LED lamps
3. Grease filter handle
4. Grease filter
5. Canopy
6. Duct covers
Control
1. Light On/Off button
2. Blower On/Off button
3. Blower speed minimum button
4. Blower speed medium button
5. Blower speed maximum button
NOTE:
Control buttons will light up when range hood is On.
Operating the light
The Light On/Off button (1) controls both lights. Press once for
On and again for Off.
Operating the blower
The Blower On/Off button (2) turns the blower On or Off.
The Blower Speed buttons (3, 4 and 5) set the desired speed and
control the sound level for quiet operation. The speed can be
changed anytime during fan operation by pressing the desired
blower speed button.
1.
To turn the blower On, press the Blower On/Off button (2) and
the desired speed button (3, 4 or 5).
2.
To turn the blower Off, press the Blower On/Off button (2).
Any of the 3 blower speed buttons can be in the On position
at the same time. The blower will operate at the highest speed
button that is pushed in. For lower blower speeds, the higher
speed buttons must not be pushed in.
