ARIETE PASTAMATIC, Инструкция по эксплуатации, Страница: 11 / 56

EN
- 9 -
APPLIANCE DESCRIPTION (Fig. 1)
A Motor base
B Control panel
C Tagliatelle die
D Fettuccine die
E Pappardelle die
F Biscuit die
G Spaghetti die
H Linguine die
I Brush
L Nut wrench
M Bowl lid
N Pasta cutter
O Liquid measuring cup
P Flour measuring cup
Q Kneading screw
R Mixing blade
S Nut
T Pasta extrusion chamber
U Bowl
APPLIANCE ASSEMBLY
ATTENTION: Before using the appliance, it is recommended to clean all removable parts that
will be in contact with food using water and common dish detergent.
- Insert the bowl (U) into the motor base (A) by slightly pressing it to lock the rear pins in the cor-
responding holes on the motor base (A) (Fig. 2).
- Place the mixing blade (R) into the bowl (U) by laying it down on the bottom (Fig. 3).
- Assemble the conveying unit by inserting the screw (Q) into the pasta extrusion chamber (T) (Fig.
4).
- By holding the mixing blade (R) with your hand, insert the previously mounted conveying unit into
the bowl (U) from outside, so that the screw (Q) passes through the middle hole on the mixing
blade (R) and the two arrows on the chamber (T) and the bowl (U) are aligned.
Lastly, press the conveying unit forwards so that the screw (Q) perfectly fits with the corresponding
housing on the motor base (A) (Fig. 5).
- Rotate the chamber (T) clockwise towards the sign in order to definitively lock the conveying
unit with the bowl (U) (Fig. 6).
- Choose the proper die, according to individual needs, and mount it on the chamber (T) (Fig. 7).
- Screw the nut (S) on the chamber (T) to lock the selected die (Fig. 8). Slightly tighten the nut by
means of the appropriate wrench supplied (L) (Fig. 9).
ATTENTION:
Before use, make sure all components are properly mounted on the appliance. When the lid
(M) is not mounted properly, the appliance does not work.
INSTRUCTIONS FOR USE
- By using the suitable measuring cup (P), pour the necessary amount of flour into the bowl (U), as
indicated on the recipe (Fig. 10).
- Close the bowl (U) with the suitable lid (M), by inserting the rear tabs in the keyholes of the motor
base (A); press downwards on the lid rear to lock it (Fig. 11).
- Plug the appliance and press the start button situated on the control panel (B) chosen according
to the required operating mode (see following paragraph). The related indicator light close to the
button itself goes on.