ARIETE 00C199420ARIT, Руководство пользователя

Страница: 13 / 16

EN
- 11 -
GAS LEAK DETECTION TEST
If a gas leak is suspected, immediately stop the supply of gas into the appliance. To stop the gas flow,
use the cylinder valve to close it. The formation of bubbles indicates a leak. Remove the regulator
from the cylinder, then the latter from the appliance. Carry out this operation outdoor. DO NOT use
the appliance before having it inspected by qualified personnel!
Carry out a gas leak detection test at least once a year, at every change of the cylinder and imme-
diately after the first installation of the appliance. Make sure the commands are in position “0” and
check all of connections are correct.
Open the regulator and check for leaks using a soapy solution.
WARNING:
DO NOT CARRY OUT THE TEST when the appliance is operating or has just been switched
off. Allow it to cool down.
DO NOT USE THE APPLIANCE in case of gas leak!
DO NOT USE OPEN FLAMES to detect leaks.
DO NOT USE electric equipment if a gas leak is suspected.
For servicing, contact the dealer, a qualified service centre or the gas supplier.
TECHNICAL FEATURES
MODEL 1994/2 (four burners)
TOTAL HEAT
4.1 kW (299 g/h)
GAS CATEGORY I3+
GAS TYPES G30/G31
GAS PRESSURE 28-30/37 mbar
NOMINAL HEAT AND INJECTOR SIZE:
LARGE BURNER (L) 1.3 kW (95 g/h) - 0.57 mm
MEDIUM BURNER (M) 1.0 kW (73 g/h) - 0.52 mm
SMALL BURNER (S) 0.8 kW (58 g/h) - 0.46 mm
HOW TO OPERATE
- Place the appliance on a stable surface away from flammable materials. Make sure the appliance
is at least 50 cm away from the surrounding objects.
- Make sure the commands (E) are positioned on “0”.
- Make sure the burner caps (B), the burner rings (C), and the support grid (A) are properly installed,
as shown in Fig. 2.