Aries 931213, Инструкция по установке и эксплуатации

Страница: 11 / 24

MOUNT INSTRUCTIONS
Wall mount must be capable of supporting a minimum
weight of 50 lbs (22.7 kg). The wall mount bracket has
holes on 16” centers to be secured to studs. If studs
are not available, a plywood sheet mounted to the wall
is recommended. Make sure holes are level.
Mount bracket with small slots in tabs pointing up.
SETUP
Select a location for the unit which is near the water
supply and electrical supply connections. If the water
supply does not already have an isolation valve for
servicing the Aries Lab System, install one ahead of
the unit connection.
Install right-angle valve into the front of the unit outlet.
+VUV[PUZ[HSS[OLÄUHSJHWZ\SLÄS[LYPU[V[OLV\[SL[]HS]L
\U[PS[OLÄUHSZ[LWVMZ[HY[\W
<ZPUN[OL[\ILÄ[[PUNZWYV]PKLK^P[O[OL\UP[JVUULJ[
the unit inlet to the water supply.
+656;VWLU[OLZ\WWS`PZVSH[PVU]HS]L
H[[OPZ[PTL
INSTALLING THE CARTRIDGES
;OLYLHYL[OYLLJHY[YPKNLWVZP[PVUZ;OL^H[LYÅV^Z
MYVTSLM[[VYPNO[(U`WYL[YLH[TLU[ÄS[LYZT\Z[IL
installed in position #1 (furthest from the display) and a
WVSPZOPUNÄS[LYT\Z[ILPUZ[HSSLKPUWVZP[PVUJSVZLZ[
to the display).
Locate the water purifying cartridges selected for your
Z`Z[LT<U^YHW[OLÄS[LYZYLTV]L[OLZOPWWPUNWS\NZ
HUKHѝ_[OLSHILSZ
7SHJL[OLSHYNLVWLUPUNH[[OLIV[[VTVM[OLÄS[LYVU[V
the plunger. Push the cartridge down and tilt back
\U[PS[OLÄS[LYPZHSPNULK^P[O[OL[VWWVZ[(SSV^[OL
ÄS[LY[VZSPKL\WV]LY[OL\WWLYÄ[[PUNHUKNLU[S`YV[H[L
left and right to insure a good seal with the top and
bottom O-rings.
9LWLH[HIV]LWYVJLK\YLMVYÄS[LYZHUK
Filters should always be installed in the 1,2,3 order
and removed in reverse – 3,2,1.
05:;(3305.;/,<=)<3)67;065
WARNING – ELECTRICAL SHOCK HAZARD.
4HRLZ\YLHSSWV^LYPZYLTV]LKMYVT[OLZ`Z[LT
Remove the top cover by removing the phillips head
screws that attach it. Gently lift the top cover up and
set it aside. The UV chamber will be visible in the top
of the lab unit.
Unclasp the clamps that hold the stainless-steel body
of the UV light. Gently lift the body up about 2 inches
to allow clearance for bulb removal.
Unscrew the blue collar which is threaded into the
stainless-steel body. Remove O-ring gasket and
stainless-steel washer.
Tabs pointing up
I N S TA L L AT I O N & O P E R AT I O N M A N U A L / 6