ARIES INDUSTRIES CT1750, Руководство по эксплуатации и обслуживанию

Страница: 18 / 75

970262_A Aries Industries, Inc. ▪ (800) 234-7205 ▪ www.ariesindustries.com Page 17
Electric Wolverine
Section One
Operation and Maintenance
Maintenance
During normal use, your Aries equipment will periodically require maintenance and adjustment.
Maintenance procedures require attention to detail to protect and maintain system integrity.
It is recommended to spray the cutter down each and every time with a degreaser (i.e. Simple
Green or equivalent) before using the cutter. The degreaser will help keep the grout and resin
materials from sticking to the cutter body, making the cutter much easier to clean after
operation.
CAUTION: To prevent personal injury or damage to equipment, turn OFF power to the system
and disconnect equipment from the power cables before performing maintenance. All
connected power cables must be powered off completely to remove power from this unit.
Cleaning/Inspection
The most effective maintenance procedure is a total cleaning and inspection of the Electric
Wolverine cutter tractor, camera, lights, and cable after each use. Cleaning eliminates sewer
residue, harsh chemicals, and resin deposits from drying and interfering with equipment
operation, which can lead to breakdowns or false readings.
Run an adequate flow of low pressure fresh water over equipment. Remove all dirt, sand,
sewer, and resin material with a soft brush. Always clean equipment before performing any
maintenance procedures or before sending in equipment for factory service.
Any maintenance done to the Electric Wolverine cutter tractor will require new O-ring seals.
Do not reuse any O-ring seals after taking apart the equipment. Part numbers for new O-ring
seals on the Electric Wolverine cutter tractor are P/Ns 380952 (Main Body), 380953 (Tip-Up),
380950 (Rotate Head), and 380951 (Up-Down Gear Box).
Typical replacement parts over time are O-ring seals, bearings, gears, and fasteners. See the
Returning Equipment section for instructions on how to return equipment for repair, or see the
Ordering Equipment section for instructions on how to order parts for in house repairs.