GB - 6
Operation
Understand:
•
How to operate all controls
•
The functions of all controls
•
How to STOP in an Emergency
•
Turning radius and clearances
Keep safety devices or guards in place and functioning
properly. NEVER modify or remove safety devices.
Ensure Safety Interlock System on tractor is
functioning properly. DO NOT operate unit if safety
interlock is damaged or disabled. Check operation of
safety system frequently.
Before starting engine: disengage PTO, place shift
lever in neutral, lower attachment and set parking
brake.
Dust, smoke, fog, etc. can reduce vision and cause an
accident. Mow only in daylight or good artificial light.
Avoid slippery surfaces. Always be sure of your footing.
DO NOT mow on wet grass. Reduced traction could
cause sliding.
Never carry passengers.
DO NOT try to stabilize the machine by putting your
foot on the ground.
Never direct discharge towards persons or property
that may be injured or damaged by thrown objects. Use
extreme caution on gravel surfaces. Stay alert for
hidden hazards or traffic.
Always stand clear of the discharge area.
ALWAYS disengage PTO, stop unit and engine,
remove key, engage parking brake and allow moving
parts to stop before leaving operator’s position.
DO NOT operate at too fast a rate. DO NOT change
engine governor settings or over-speed engine. Slow
down before turning.
Use extreme caution when approaching blind corners,
shrubs, trees or other objects that may obscure vision.
DO NOT operate in reverse unless absolutely
necessary. ALWAYS look down and behind before and
while backing.
If equipment vibrates abnormally, stop engine at once,
wait for moving parts to stop and remove wire from
spark plug. Repair any damage before restarting unit.
Take all possible precautions when leaving unit
unattended. Shut off engine. Remove wire from spark
plug and secure it away from spark plug.
ALWAYS remove key to prevent unauthorized use.
Know the weight of loads. Limit loads to those you can
safely control and the unit can safely handle.
Disengage PTO when attachment is not in use.
ALWAYS turn off power to attachment when travelling,
crossing driveways, etc.
Hazardous Slopes
Mow up and down slopes, not across them. Do not
operate on slopes over 10˚.
Keep all movements on the slope
slow
and
gradual
. Do
not make sudden changes in speed or direction.
Avoid starting or stopping on the slope. If tires lose
traction, disengage the blades and proceed slowly
straight
down the slope.
If you cannot back up a slope or you feel uneasy on it,
do not mow it.
DO NOT park on slopes unless necessary. When
parking on slope always chock or block wheels. Always
set parking brake.
Transport
Use extra care when loading or unloading unit onto
trailer or truck.
Secure unit chassis to transport vehicle. NEVER
secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment when
transporting.
Cleaning
Keep unit free of leaves, debris, etc. Clean up oil or fuel
spills.
MAINTENANCE AND SERVICE SAFETY
RULES
ALWAYS block wheels and know all jack stands are
strong and secure and will hold weight of unit during
maintenance.
Keep nuts and bolts tight, especially blade attachment
bolts, and keep equipment in good condition.
NEVER attempt to make any adjustments to unit while
engine is running. Stop engine, remove spark plug wire
and wait for all moving parts to stop before servicing
(except where specifically recommended).
ALWAYS maintain unit in safe operating condition.
NO smoking, NO sparks, NO flames. Always allow
engine to cool before servicing.
STORAGE SAFETY RULES
For extended storage, clean unit thoroughly.
Lower cutting deck unless a positive mechanical lock is
used.
ACCESSORY AND ATTACHMENT SAFETY
RULES
Use only attachments or accessories designed for your
unit.
Check attachment components frequently. If worn or
damaged, replace with manufacturer’s recommended
parts.
