manualshive.com logo in svg

Ariens Grand Sierra GT 831026, Руководство владельца/оператора и каталог запасных частей

Поделиться
Скачать
Ariens Grand Sierra GT 831026 Скачать руководство пользователя страница 13

GB - 13

SHORT TERM

IMPORTANT: 

NEVER spray unit with water or store 

unit outdoors.

Inspect unit for visible signs of wear, breakage or 
damage.

Keep all nuts, bolts and screws properly tightened and 
know unit is in safe working condition.

Store unit in a cool, dry protected area.

LONG TERM

Clean unit thoroughly and lubricate (see 

Maintenance

). 

Touch up all scratched painted surfaces.

Remove weight from wheels by putting blocks under 
frame or axle.

When storing unit for extended periods of time, remove 
all fuel from tank and carburetor (run dry). Refer to 
engine manual.

Clean and charge the battery. Charge battery every 
three to four weeks when storing unit.

STORAGE

WARNING: 

AVOID INJURY. Read and 

understand 

Storage Safety Rules 

in 

Safety 

section before proceeding.

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION 

Mower won’t 
engage

1. Attachment blocked.
2. Bad PTO switch.

1. Stop unit, remove key and clear attachment.
2. Replace switch (see Dealer).

Abnormal 
vibrations or 
sounds

1. Loose hardware.
2. Debris in mower deck.
3. Mower blades damaged.
4. Mower belt damaged or off pulleys.

1. Check and tighten all hardware.
2. Clear debris before starting unit.
3. Replace mower blades.
4. Install or replace belt.

Содержание Grand Sierra GT 831026



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды