GB - 13
Steering Levers
•
Reverse (1) – Pull both steering levers
backward.
•
Forward (2) – Push both steering levers
forward.
•
Left (3) – Pull left steering lever back or
push right steering lever forward or a
combination of both.
•
Right (4) – Pull right steering lever back
or push left steering lever forward or a
combination of both.
NOTE: To stop, return both steering levers to
neutral.
NOTE: The steering levers must be in the
neutral position to start the engine.
NOTE: The parking brake must be
disengaged prior to moving the steering
levers from the neutral position.
Mower Lift Pedal (figure 5)
Raises and lowers the deck.
NOTE: The adjustment pin is used to set the
height of the mower deck. See
SPECIFICATIONS on page 28 for cutting
height dimensions.
Press mower lift pedal and install adjustment
pin in the desired adjustment hole.
NOTE: Adjusting the seat
further forward will help
increase the leverage in
lifting the mower deck (see
FILLING FUEL TANKS on
page 13).
Adjusting Seat
Lift adjustment lever and slide seat forward or
backward to the desired position.
FILLING FUEL TANKS
1. Clean fuel caps and surrounding area to
prevent dust, dirt, and debris from
entering fuel tanks.
2. Remove fuel caps.
IMPORTANT: See Engine Manual for correct
type and grade of fuel.
3. Fill fuel tanks to 2-1/2 in. (6.35 cm)
below bottom of filler neck. See
SPECIFICATIONS on page 28 for
capacity of fuel tanks.
4. Replace fuel caps.
1
2
3
4
Figure 5
1. Adjustment Pin
2. Mower Lift Pedal
3. Adjustment Hole
02988000
7
08088400A
Figure 6
1. Seat
2. Adjustment Lever
