GB - 11
6. Check engine crankcase oil level. See
engine manual.
7. Connect the battery ground cable (–) to
the negative battery terminal.
8. Fill fuel tank. DO NOT OVERFILL! (See
FILLING THE FUEL TANK
on page 15).
NOTE:
After the first twenty-five hours of
operation, belt wear may require the PTO
clutch cable and the drive control cables to be
adjusted. See
Forward/Reverse Drive
Controls
on page 20 and
Wheel Drive Belts
on page 21.
IMPORTANT:
Do not operate the unit without
understanding how the controls work and
how to safely start, stop and operate the unit.
Figure 4
1
3
1. Handlebar Folded Down
2. Upper Handlebar Bolts
3. Emission Component Shelf
2
3
2
2
Figure 5
1. Negative (–) Battery Cable
1
