Ariens 911173 Скачать руководство пользователя страница 7

EN - 7

Operation

The engine/blade control feature on mower 
stops engine and blade within 5 seconds 
whenever operator releases PTO lever. 
Check this feature frequently. If feature fails 
to operate, disconnect spark plug wire and 
adjust or have it repaired before using unit.

Be sure the area is clear of bystanders 
before operating. Stop machine if anyone 
enters the area.

Never operate machine in a closed or poorly 
ventilated area.

ALWAYS maintain unit in safe operating 
condition. Damaged or worn out muffler can 
cause fire or explosion.

This product is equipped with an internal 
combustion type engine. DO NOT use unit 
on or near any unimproved, forest-covered 
or brush covered land unless exhaust 
system is equipped with a spark arrester 
meeting applicable local, state or federal 
laws. A spark arrester, if it is used, must be 
maintained in effective working order by 
operator.

Do not operate machine while under the 
influence of alcohol or drugs.

Do not put hands or feet near rotating parts 
or under the machine. Keep clear of the 
discharge opening at all times.

DO NOT touch parts which are hot. Allow 
parts to cool.

Do not operate machine without the entire 
grass catcher, discharge guard, or other 
safety devices in place and working.

Always keep hands and feet away from all 
pinch points.

Never operate mower in wet grass. Always 
be sure of your footing; walk; never run.

Never direct discharged material toward 
anyone. Avoid discharging material against 
a wall or obstruction. Material may ricochet 
back toward the operator. Stop the blade(s) 
when crossing gravel surfaces.

Disengage the drive system, if so equipped, 
before starting the engine (motor).

If the machine should start to vibrate 
abnormally, stop the engine (motor) and 
check for the cause immediately. Vibration is 
generally a warning of trouble.

Keep safety devices or guards in place and 
functioning properly. Never modify or 
remove safety devices.

Do not pull machine backward unless 
absolutely necessary. Always look down and 
behind before and while moving backward.

Stop engine before removing grass catcher 
or unclogging chute.

If you strike a foreign object, stop and 
inspect the machine. Repair, if necessary, 
before restarting.

Never leave a running machine unattended.

Stop the engine (motor) and wait until the 
blade(s) comes to a complete stop before 
cleaning the machine, removing grass 
catcher, or unclogging the discharge guard.

On self-propelled models, wheel drive must 
be disengaged when starting engine.

On self-propelled models, releasing wheel 
drive control must stop mower’s forward 
movement. If this feature fails to operate, 
disconnect spark plug wire and repair before 
using unit.

Operating Conditions

Watch for traffic when operating near or 
crossing roadways.

Clear the area of objects such as rocks, 
wire, toys, etc., which could be thrown by the 
blades. Stay behind the handle when the 
engine (motor) is running.

Use care when approaching blind corners, 
shrubs, trees or other objects that may 
obscure vision.

Dust, smoke, fog, etc. can reduce vision and 
cause an accident. 

Operate machine only in daylight or good 
artificial light.

See manufacturer’s instructions for proper 
operation and installation of accessories. 
Only use accessories approved by the 
manufacturer.

Slope Operation

Slopes are a major factor related to loss of 
control and tip-over accidents, which can 
result in severe injury or death. Operation on 
all slopes requires extra caution. If you feel 
uneasy on it, do not mow it.

Mow across slopes, never up and down. 
Exercise caution when changing direction 
on slopes.

Содержание 911173































Отзывы: