Ariens 891003, Руководство владельца/оператора

Страница: 13 / 32

13
INSTALL BAGS
Install Bags on Catcher Frame
1. Install the mesh xl bagger bags (item 15) on bagger
cover assembly (item 9) with the heat resistant side
(smooth side) of the bags facing the unit.
INSTALL BLOWER ASSEMBLY
NOTE: The complete blower assembly installs with a
combination of parts provided in the blower mount kit and
in this bagger kit and with parts originally installed on the
unit. Make sure you have all hardware available when
installing the bagger kit and blower assembly.
Install Bagger Adapter Kit
IMPORTANT: Follow the detailed instructions provided in
the bagger adapter kits. General instructions are given
here in case the instruction sheet gets lost.
1. Inspect the anti-scalp roller bracket and cut a
mounting slot if necessary.
2. Install the pump mounting bracket on the blower
assembly (item 19).
3. Install the blower assembly (item 19) on the deck
and secure it with the knob supplied in the blower
mount kit.
4. Install the blower belt supplied in the bagger mount
kit on the top pulley of the deck spindle and on the
blower pulley as shown in Figure 11.
NOTE: Notice where the belt twists.
CAUTION: Make sure the heat resistant side
(smooth side) of the mesh bags faces the unit.
Figure 10
Install grass bags so the
smooth, heat resistant side
faces the unit.
9
15
Figure 11
Blower assembly and
mounting bracket.
Wing Knob
Round Head
Square Neck
Bolt
Spacer
Wing Knob
Spacer
Round Head
Square Neck Bolt