Ariens 27-Ton Log Splitter, Руководство пользователя

Страница: 17 / 28

GB - 17
IMPORTANT: Proper maintenance can
prolong the life of unit. The following chart
shows the recommended service schedule.
MAINTENANCE SCHEDULE
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Interval Task Action
Each Use Clean Unit Clean engine and hydraulic tank of all dirt and debris. DO NOT
spray unit with water. Do not use solvents, hard cleaners, or
abrasives.
NOTE: Protect painted surfaces with automotive-type wax.
Check Tires See SPECIFICATIONS on page 21 for correct tire pressure. See
Check Tire Pressure on page 9.
Check Engine
Oil Refer to engine manual.
Check
Hydraulic Oil
Level See Checking Hydraulic Oil Level on page 18.
Check
Hydraulic
Lines Check for leaking, kinked or damaged lines. Replace as necessary.
See
HYDRAULIC OIL SYSTEM on page 18.
Follow Engine
Maintenance
Schedule Perform scheduled engine maintenance. Refer to Engine Manual
for detailed instructions.
50 Hours
or Every
Season Check
Fasteners Check all fasteners. Replace fasteners that are missing or
damaged. Tighten all nuts and bolts to the correct torque value.
100 Hours
or Every
Season Change
Hydraulic Oil
and Filter Drain oil from hydraulic tank, replace filter and refill tank with
hydraulic oil. See
Recommended Hydraulic Oil on page 18.
Check
Hydraulic
Drive
Coupling Inspect hydraulic drive coupling for damage or deterioration.
Replace as necessary.
Check Wheel
Bearings Remove bearing dust caps and inspect and repack wheel bearings
with grease. After packing bearings seat bearings by tightening the
spindle nut snug. Loosen nut, spin wheel and retighten slightly until
first slot in castle nut aligns with hole in hub. Replace cotter pin and
dust cap. Wheel should spin freely with no wobble.
Hydraulic
Pump
Drive
Coupling
Engine