Ariens 1542 EZR Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 33

Ariens 1542 EZR Скачать руководство пользователя страница 6

6

4. Review recommended lubrication, maintenance

and adjustments.

5. Review Limited Warranty Policy. Fill out Original

Purchaser Registration Card and return the card
to Ariens Company.

SAFETY ALERTS

Look for these symbols to point out
important safety precautions. They mean:

Attention!

Personal Safety Is Involved!

Become Alert!

Obey The Message!

The safety alert symbols above and signal words below
are used on decals and in this manual.

Read and understand all safety messages.

NOTATIONS

NOTE:

General reference information for proper

operation and maintenance practices.

IMPORTANT:

Specific procedures or information

required to prevent damage to unit or attachment.

PRACTICES AND LAWS

Practice usual and customary safe working
precautions, for the benefit of yourself and others.
Understand and follow all safety messages. Be alert to
unsafe conditions and the possibility of minor,
moderate, or serious injury or death. Learn applicable
rules and laws in your area.

REQUIRED OPERATOR TRAINING

Original purchaser of this unit was instructed by the
seller on safe and proper operation. If unit is to be used
by someone other than original purchaser; loaned,
rented or sold, ALWAYS provide this manual and any
needed safety training before operation.

SAFETY DECALS AND LOCATIONS

ALWAYS replace missing or damaged Safety Decals.
Refer to figure below for Safety Decal locations.

1. DANGER!

TO AVOID SERIOUS INJURY OR DEATH

Read operator’s manual.

Keep children and others away from unit
while operating.

SAFETY

DANGER:

IMMINENTLY HAZARDOUS

SITUATION! If not avoided, WILL RESULT in
death or serious injury.

WARNING:

POTENTIALLY HAZARDOUS

SITUATION! If not avoided, COULD RESULT
in death or serious injury.

CAUTION:

POTENTIALLY HAZARDOUS

SITUATION! If not avoided, MAY RESULT in
minor or moderate injury. It may also be used
to alert against unsafe practices.

1

DANGER/DANGER/PELIGRO

WARNING/AVERTISSEMENT/ADVERTENCIA

FOR SAFE DECK REMOVAL/POUR UNE DÉPOSE DU CARTER DE COUPE EN TOUTE SÉCURITÉ /PARA LA EXTRACCION SEGURA DE LA PLATAFORMA

5
4
3
2
1

1

2

1

2

3

´

052240

ADVARSEL

052269

FOR SIKKER AFMONTERING AF KLIPPER

FORSVARLIG FJERNING AV PLATTFORM

TA BORT DÄCKET PÅ ETT SÄKERT SÄTT

ADVARSEL

VARNING

2

3

5

4

OE0880

915307

OL1801

OL4140

«
...
4
5
6
7
8
...
»

Содержание 1542 EZR


































Отзывы:

Нет отзывов