manualshive.com logo in svg

Ariens 1542 EZR, Руководство владельца/оператора, Страница: 29 / 33

Поделиться
Скачать
Ariens 1542 EZR Скачать руководство пользователя страница 29

29

Prepare your tractor for storage at the end of the 
season or if the tractor will not be used for 30 days or 
more.

TRACTOR / DECK

IMPORTANT: 

Never spray unit with water or store unit 

outdoors.

Remove all dirt, grease, leaves, etc. Store in a clean, 
dry area.

•

Check entire tractor (See “CLEANING” in the 
Maintenance section of this manual).

•

Inspect and replace belts, if necessary. (See 
"BELT REPLACEMENT" in the Service and 
Adjustments section of this manual).

•

Lubricate as shown in 

Maintenance

.

•

Be sure that all nuts, bolts and screws are 
securely fastened. Inspect moving parts for 
damage and wear. Replace if necessary.

•

Touch up all rusted or chipped paint surfaces; 
sand lightly before painting.

BATTERY

•

Fully charge the battery for storage.

•

After a period of time in storage, battery may 
require recharging.

•

To help prevent corrosion and power leakage 
during long periods of storage, battery cables 
should be disconnected and battery cleaned 
thoroughly (See 

To Clean Battery and Terminals

 

in 

Maintenance

).

•

After cleaning, leave cables disconnected and 
place cables where they cannot come in contact 
with battery terminals.

•

If battery is removed from tractor for storage, do 
not store battery directly on concrete or damp 
surfaces.

ENGINE

See the Engine Manual for detailed instructions on 
storage.

* Available for 915307

STORAGE

CAUTION: 

Never store the tractor with 

gasoline in the tank inside a building where 
fumes may reach an open flame or spark. 
Allow the engine to cool before storing in any 
enclosure.

CAUTION: 

Never cover tractor while engine 

and exhaust areas are still warm.

ATTACHMENTS & ACCESSORIES

See your authorized Ariens dealer to add these 
optional accessories.

71500300

Front Weight Kit*

71500700

Rear Weight Kit

71500900

Wheel Spacer Kit

71501000

Tire Chain Kit

71501100

Headlight Kit*

71501200

Hourmeter Kit*

71501300

42" Mulching Kit*

73401100

48" Mulching Kit

81500300

40" Snow Head

81500600

Front Blade

81500800

2 Bucket Bagger - 42" Deck*

SERVICE PARTS

Be sure to always use genuine Ariens parts to keep 
your unit running like new.

Part no.

Qty

Description

03123751

3

Blade - 48" Deck

01586200
01585000

2
2

Blade - 42" Deck
Blade - 42" Deck (CE)

07237500

1

Cog Belt - 42" Deck

07234400

1

Belt - 48" Deck

07212300

1

Transmission Belt

07234500

1

Clutch to Deck Belt - 48" 
Deck

07237400

1

Clutch to Deck Belt - 42" 
Deck

Содержание 1542 EZR


































Отзывы:

Нет отзывов