EN - 11
CONTROL LEVER
See Figure 9.
The control lever is used to move the splitting
wedge in or out when operating in the
horizontal position or up and down when
operating in the vertical position.
Out / Down
Move lever in this direction to extend cylinder
toward end plate. Keep pressure on lever
until log is split. Lever does not lock in this
position. Release as soon as log is split or
cylinder is fully extended.
Neutral
In this position the cylinder does not move
even though the engine is running.
Return / Up
Move lever in this direction to retract cylinder.
Push lever fully in this direction to lock in
return mode. Lever will automatically return to
neutral once cylinder fully retracts.
Figure 9
Horizontal Operating Position
Vertical Operating Position
1. Out / Down
2. Neutral
3. Return / Up
