OPERATOR MANUAL
20
10. Automatic Cycle Procedure_
In the Automatic cycle mode, all the
operations (Refrigerant Recovering
and Recycling, Recovered Oil Drain,
Evacuation, New Oil and/or UV Dye
Injection and Refrigerant Charging)
are performed automatically one after
the other in ONE CYCLE.
Quantity of the refrigerant recovered,
recovered oil, vacuum time, oil injected
and refrigerant charged into the A/C
system are printed at the end of each
single operation.
To initiate the Automatic cycle mode, press the 'DOWN' key
once, followed by 'START' on the console.
Press "START" button to confirm the
Recovery function
.
By pressing the 'UP' key to increase or 'DOWN' key to
decrease select the desired
Evacuation
Time Duration.
Once the desired time has been selected, press 'START' key.
Oil/UV Dye injection selection
. The operator can choose between:
-
AUTOMATIC
selection. The unit determines the quantity of oil extracted during the recovery
process and will inject the same quantity back in the a/c system. Only desired quantity of UV
dye can be selected.
-
MANUAL
selection. With 'UP' key (to increase) or "DOWN" key (to decrease) select the
amount of refrigerant oil and/or UV dye to be injected into the a/c system (above the amount of
extracted oil). Press ">" key to change UV Dye selection.
Once the desired amount has been selected, press the 'START' key.
