OPERATOR MANUAL
10
7. Mode Selection.
To select a mode of operation, press either the
"UP" or "DOWN" arrow keys until the LED
indicator is beside the desired function.
Press 'START' key which will cause the unit to
enter the selected mode. Any mode that has
been selected can be exited by pressing the
'STOP' key.
Note, that if a valid key was depressed, the unit
will beep. If an inappropriate selection has been
made, i.e. attempting to select a mode whilst
another mode is in operation, the unit will ignore
the pressed key and will not beep.
8. Check if both cylinder (12) valves and liquid hose (16) ball valve are open.
9. Attach the service hoses (5) on the unit. Carefully tight (with fingers only) knurled nut on
console bellow hand wheels (blue-left, red-right). Hook up quick couplers (6) to parking brass
adapter (pull back bottom knurled section with fingers and carefully press the coupler into the
proper adapter).
10. Fill the plastic oil vessels (10) with new oil (minimum 50ml) and plastic vessel (11) with UV
Dye (minimum 50ml). The display in Stand by mode will show the amount of the oil filled in new
oil injector.
