39
Base Installation with
Lap/Shoulder Belt
Route the lap/shoulder belt through
the belt path openings on both sides
of base and under the FirmFit arm.
Make sure not to twist the belts and
make sure they lie flat.
Fasten the buckle until it clicks into
place. Pull shoulder belt to remove
all the slack from the vehicle belt
and to get the base snug against the
vehicle seat.
Close the FirmFit arm until it locks
into place and you see
GREEN
in the
indicator window.
CHECK
to make sure base is secure
by holding both sides of the base
near the vehicle belt and moving it
from side to side and front and back.
The lap/shoulder belt should not
loosen and the base should not move
easily. The base should not move
more than 1 inch (2.5 cm) from side to
side or front to back.
CLICK!
5
6
CLICK!
4
Содержание Asana 35 AP
Страница 74: ...74 Notes...
Страница 75: ...75 Notes...