9
ARI Motors GmbH •
Maintenance
VEHICLE MAINTENANCE
CHARGER AND BATTERY MAINTENANCE
1.) About a month after purchase, check that all screws and nuts are tight. If there are
loose bolts or nuts, tighten them.
2.) Keep the brake discs clean! With increased dirt it can lead to a reduced braking
effect as well as noise development. Should the brake discs need to be replaced, have
this troubleshooting carried out by a professional maintenance service.
1.) Only use the original charger.
2.) The charger should be used in a well-ventilated area. Under no circumstances
should it be used in an enclosed space as well as in strong or high sunlight
temperatures. Do not pack the charger under the seat or the rear case.
3.) When charging, insert the battery first and connect it then with a power source.
After charging, disconnect the battery or the charger from the power source and
only then pull the plug on the battery.
4.) When the green light is on, you should disconnect the device from the power
source. The charger and the power source must not be connected for a long period
of time without a charging process being carried out.
5.) Stop charging immediately if the charger overheats, the control lamp lights up
abnormally or there is an unusual smell.
6.) To avoid short circuits, make sure that when storing or in use, no other substances
(especially water and other liquids) enter the device.
7.) Do not exchange or remove any parts inside the charger.
8.) Keep the charger away from children.
9.) Charge the vehicle fully before you set off. Otherwise the service life of the battery
will be reduced.
10.) Never cover the charger during the charging process.
