ARI-Armaturen ARI-PREMIO-Plus 2G страница 4 Скачать руководство пользователя | Manualshive

Страница: 4 / 52

background image

Page 2-4

0040501006 3814

Operating and installation instructions

Thrust actuator ARI-PREMIO

®

-Plus 2G

2.2 Explanatory notes on safety information

In these Operating and Installation Instructions dangers, risks and items of safety information are
highlighted to attract special attention.
Information marked with the above symbol and “

ATTENTION !

” describe practices, a failure to

comply with which can result in serious injury or danger of death for users or third parties or in
material damage to the system or the environment. It is vital to comply with these practices and to
monitor compliance.
All other information not specifically emphasised such as transport, installation, operating and
maintenance instructions as well as technical data (in the operating instructions, product
documentation and on the device itself) must also be complied with to the fullest extent in order to
avoid faults which in turn can cause serious injury to persons or damage to property.

3.0 Storage and transport

- At -40°C to +85°C dry, free from dirt.
- Do not unpack thrust drive or setting equipment assembly prior to installation.
- Protect against external force (impact, vibration etc.).
- Do not soil or damage type identification plate and wiring diagram on the controller.

ATTENTION !

- Valve mountings such as drives, handwheels, hoods must not be used to take

external forces, e.g. they are not designed for use as climbing aids, or as connecting
points for lifting gear.
Non-compliance may lead to death, injury or damage to property due to persons
falling or parts being dropped.

- Suitable materials handling and lifting equipment should be used.

See „4.4 Technical data“.

«
...
2
3
4
5
6
...
»

Содержание ARI-PREMIO-Plus 2G





















































Отзывы:

Нет отзывов

Похожие инструкции для ARI-PREMIO-Plus 2G

Бренд: Panasonic Страницы: 16

Бренд: Rane Страницы: 2

Бренд: Vageo Страницы: 2

Бренд: Vacon Страницы: 6

Бренд: Vacon Страницы: 24

Бренд: Vacon Страницы: 30

Бренд: Vacon Страницы: 81

Бренд: Vacon Страницы: 100

Бренд: YASKAWA Страницы: 49

Бренд: M-system Страницы: 17

Бренд: National Instruments Страницы: 19

Бренд: Leggett & Platt Страницы: 20

Бренд: SMC Networks Страницы: 31

Бренд: Lab-T Страницы: 17

Бренд: KROHNE Страницы: 88

Бренд: ICP DAS USA Страницы: 6

Бренд: Danfoss Страницы: 22

Бренд: Alfa Laval Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды