ARHAUS ADONES 70ADONES42RD, Инструкция по сборке

Страница: 363 / 405

4 7
(Fig. 16)
(Fig. 17)
(Fig. 18)
To OPERATE the 360° Rotating Hub Swivel:
Place your foot on the foot pedal of the rotating hub and step-on the base pedal
to release rotating lock (Fig. 16). Place one hand on the main frame and one hand on the
tilt lever (Fig. 17), swivel the umbrella frame in either direction until desired position is
reached (Fig. 18). Step off the foot pedal to engage rotating lock and lock position (you will
hear the pedal click, as it reaches the next available lock position).
Features
6mm
Hexagon
Wrench
2.5mm
Hexagon
Wrench
(Fig. 4)
(Fig. 5)
(Fig. 6)
S T E P 2 Umbrella Assembly
Two-persons recommended for team lift and to complete assembly.
With base cover in place or mount kit installed, insert the main frame onto the installed
rotating hub (Fig. 3) {align tilt lever with foot pedal}. Assembled in upright position, insert the
(2) bolts and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 4). Install
the crank lift handle onto the mid-area of the main frame. Use the 2.5mm hexagon wrench
provided to lock in the small screw (Fig. 5).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your umbrella is now ready to operate!
363