ARHAUS ADONES 70ADONES42RD, Инструкция по сборке

Страница: 364 / 405

8 3
To ATTACH Umbrella Light: (sold separately)
Loosen the light adapter built into the umbrella runner by turning counter-clockwise
(Fig. 19). After loosening, pull down light adapter post (Fig. 20) to attach the
umbrella light (sold separately).
To REMOVE Umbrella Light and CLOSE adapter:
Remove umbrella light, and gently push up the light adapter post back into umbrella runner
and tighten turning clockwise (Fig. 19).
NOTE: It is not necessary to remove light
to close umbrella.
(Fig. 19)
(Fig. 20)
Features
S T E P 1
Rotating Hub Assembly
If you have already installed your rotating hub onto your base or mount kit, please skip to
Step 2.
Remove rotating hub from the main frame by removing the (2) main frame bolts and (2)
washers (Fig. 1), set aside bolts for later use. Now, place rotating hub onto base plate (if
installing onto a mount kit), inverted plate (if installing onto 200 lbs. base) or base frame (if
installing onto 400 lbs. base) (Fig. 2) and tighten with (5) supplied hub bolts and washers
(Fig. 3). Example shown on 200 lbs. base below.
6mm
Hexagon
Wrench
8mm Hexagon Wrench
(Fig. 2)
(Fig. 1)
(Fig. 3)
364