ARH MICROCAM, Руководство пользователя

Страница: 37 / 82

MicroCAM User Manual
Page 36/82
6.5. FLASH CONTROL
WEB INTERFACE > BASIC SETUP > LIVE VIEW > FLASH
The settings of the built-in illuminator and filter exchanger can be managed clicking the FLASH
button at the Live View menu.
Indoor mode: (can be selected in Mode menu at Brightness Control)
 IR Filter: switch between the two states Infra_Cut and All_Pass

Flash Intensity: set the intensity of the built-in illuminator between 0 and 100%
 Parity Flashing: if set, odd frames will be illuminated with reduced intensity. For example,
if this value is set to 50%, odd frames will be illuminated with 50% of the intensity of the
even frames.
Outdoor mode:

Both Flash Intensity and Parity Flashing can be defined for day and night mode.

IR Filter will be set automatically.
"Parity Flashing" does not use and is not measured by the same scale as "Flash Intensity".
Instead, "Parity Flashing" is expressed as a percentage of and relative to the calibration
for "Flash Intensity".