ARGUS TECHNOLOGIES (AUSTRALIA) PTY LTD
10-12 LEXINGTON DRIVE, NORWEST BUSINESS PARK, BELLA VISTA, NSW 2153, AUSTRALIA
TEL : +61 2 88840888 FAX : +61 2 88840 882 - A.C.N 066 338 654 ABN 57 066 338 654
DOCUMENT A175-5072RevA.
PAGE 15 OF 18
Returns to the first option in the list of antenna data.
4.3.7 Selecting
a
band.
Once an antenna is found the CTXD-30-H automatically selects band 1. If the
antenna has numerous bands(maximum of 3) then you can press the BAND
SELECTOR button and this will cycle through the available bands of the antenna.
Each time you select a new band, the unit displays that bands downtilt value on
the fourth line:
“READ DOWNTILT: +/-xx.x” the angle of downtilt currently set.
When you at the last available band pressing the BAND button again will return
you to band 1 of the antenna.
4.3.8 Setting new down-tilt angle.
You can change the downtilt of any band on any antenna that the CTXD-30-H is
connected to by selecting the desired antenna, then the desired band. The unit
should read out the currently set angle on the fourth line.
“READ DOWNTILT: +/-xx.x” the angle of downtilt currently set.
The third line on the LCD will read
“SET DOWNTILT: +/-xx.x” the angle of desired downtilt.
and also shows the current downtilt angle. By pressing the up or down buttons
you can change the angle on this line. Once this line reads the desired angle
press the send button and the antenna will change its downtilt. The CTXD-30-H
constantly updates the current angle during this process so you can see the
angle changing on the fourth line
“READ DOWNTILT: +/-xx.x” the angle of downtilt currently set.
