ARGUS TECHNOLOGIES (AUSTRALIA) PTY LTD
10-12 LEXINGTON DRIVE, NORWEST BUSINESS PARK, BELLA VISTA, NSW 2153, AUSTRALIA
TEL : +61 2 88840888 FAX : +61 2 88840 882 - A.C.N 066 338 654 ABN 57 066 338 654
DOCUMENT A175-5072RevA.
PAGE 12 OF 18
When you have selected the appropriate number of units to scan for, press the
‘FIND’ button again to commence scanning.
4.3.4 Scanning
for
antennas
via Unique Identifier
With “PUSH FIND TO OPERATE” on the LCD. Press the ‘FIND’ button once, this
brings up the scan range setting screen.
The screen reads
“PRESS INC/DEC TO”
“CHANGE NO. OF DIGITS TO”
“SCAN: 3”
“PRESS FIND TO START”
You can change the number of units to scan for by pressing the ‘Increase’ and
‘Decrease’ buttons.
Press the ‘Increase’ button and the screen reads:
“PRESS INC/DEC TO”
“CHANGE NO. OF DIGITS TO”
“SCAN: 4”
“PRESS FIND TO START”
Now press the ‘Decrease button and the screen reads:
“PRESS INC/DEC TO”
“CHANGE NO. OF DIGITS TO”
“SCAN: 3”
“PRESS FIND TO START”
With a 2 selected, the unit scans from xxxxxx00 to xxxxxx99
With a 3 selected, the unit scans from xxxxx000 to xxxxx999.
With a 4 selected, the unit scans from xxxx0000 to xxxx9999. etc
The unit scans for unique serial numbers, using a predetermined algorithm which
minimises the time spent scanning.
When you have selected the appropriate number of units to scan for, press the
‘FIND’ button again to commence scanning. When an antenna is located, a new
HDLC address will be assigned to it, with the first antennas HDLC address
starting at 1.
Depending upon the number of antennas connected and their serial numbers,
the user may have to choose a higher number of digits to scan antennas with. If
