manualshive.com logo in svg

Argox PA-6230, Руководство пользователя

Поделиться
Скачать
Argox PA-6230 Скачать руководство пользователя страница 85

 

User’s Manual                                                            

80

 

 

 

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

  

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

-Consult the dealer or an experienced radio/ TV technician for help. 

CAUTION:

  

Any changes or modifications not expressly approved by the grantee of this device could void 

the user's authority to operate the equipment. 

 

Labeling requirements

  

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation. 

 

 

RF exposure warning 

This equipment must be installed and operated in accordance with provided instructions and must not be 

co-located or operating in conjunction with any other antenna or transmitter. End-users and installers 

must be providing with antenna installation instructions and transmitter operating conditions for 

satisfying RF exposure compliance. SAR Value: 0.74 W/kg

 

 

Information for the OEMs and Integrators 

 

The following statement must be included with all versions of this document supplied to an 

OEM or integrator, but should not be distributed to the end user. 

 

1) This device is intended for OEM integrators only. 

2) Please see the full Grant of Equipment document for other restrictions. 

 

This radio transmitter FCC ID: NBF-SDMN has been approved by FCC to operate with the 

antenna types listed below with the maximum permissible gain and required antenna 

impedance for each antenna type indicated. Antenna types not included in this list, having a 

gain greater than the maximum gain indicated for that type, are strictly prohibited for use with 

this device. 

 

Antenna List 

No. 

Manufacturer 

Part No. 

Antenna Type 

Peak Gain 

1 

WGT 

AQ06A 

PIFA 

4.80 dBi for 2.4 GHz 

2 

Ji-Haw 

69-70002-001 

PIFA 

3.48 dBi for 2.4 GHz 

3 

Ji-Haw 

69-70003-001 

PIFA 

3.23 dBi for 2.4 GHz 

4 

LYNwave 

ALB120-0520-150052 

PIFA 

2.70 dBi for 2.4 GHz 

5 

LYNwave 

ALA110-052021 

PIFA 

3.59 dBi for 2.4 GHz 

 

Note: The antenna connector is I-pex type. 

Содержание PA-6230






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды