64
Important notice during TPH replacement
1. Heater line should NOT be touched by bare hands to
prevent any damage caused by ESD or corrosion.
2. Surface of heaters should NOT be hit or scratched by
sharp or hard things to prevent any damage by scratch.
3. Residue or contamination should NOT be removed by a
cutter to prevent any damage by dent or scratch.
4. Connector side should NOT be touched when cleaning
TPH to prevent delaminated solder between FPC and
wafer. Ink-jet characters could be erased, if cleaning cloth
was touched them on FPC or label.
5. Heater surface should be free from any condensation.
6. TPH should NOT be put heater surface down.
65
Technical Reference
General Specifications
Specifications
OS-314plus
Printing Method
Direct Thermal / Thermal Transfer
Printing
Resolution
300 dpi(12 dots/mm)
Printing Speed
Up to 4ips
Printing Length
Max 50" (1270 mm)
Printing Width
Max 4.1”(104mm), Min 1”(25.4mm)
Memory
8MB DRAM(5MB user available) 4MB Flash
ROM(2MB user available)
CPU Type
32 bit RISC microprocessor
Sensors
Media gap & black line Reflective sensor
Operation
Interface
LED indicator (Power/Ready)x 2, Button(Feed) x 1
Communication
Interface
RS-232, USB, Parallel
Fonts
Internal character sets standard
5 alpha-numeric fonts from 0.049”H ~ 0.23” H
(1.25mm ~ 6.0mm)
Internal fonts are expandable up to 24x24 4
direction 0 ~ 270 rotation
Soft fonts are downloadable
Ability to print any Windows True Type font easily
1D Barcodes
PPLA:
Code 39, Code 93,Code 128/subset A/B/C, Codabar,
Interleaved 2 of 5, UPC A/E/2/5 add-on, EAN-13/8,
UCC/EAN 128, Postnet, Plessey, Interleaved 2 of 5,
Interleaved 2 of 5 with a modulo 10 checksum,
Interleaved 2 of 5 with a modulo 10 checksum and
shipping bearer bars , Code 128, UCC/EAN Code
128 Random Weight, HBIC, Telepen , FIM
