56
at cutter
Recover the jam
installing or setting the
cutter
Hardware error
Call for service
LED Indicators:
Only the Ready LED blinks
Power LED
Ready LED
ON
ON
ON
OFF
Possible Problems
Solutions
Remarks
Print head too hot
Printing will stop until the
print head cools to an
acceptable printing
temperature. When it
does, the printer will
automatically resume
operation.
57
Miscellaneous
If the host shows "Printer Time out"
1. Check if the communication cable (parallel or serial) is
connected securely to your parallel or serial port on the
PC and to the connector on the printer at the other end.
2. Check if the printer power is turned on.
If the data has been sent, but there is no output from the printer.
Check the active printer driver, and see if Seagull driver for your
Windows system and the label printer has been selected.
Vertical streaks in the printout usually indicate a dirty or faulty
print head. (Refer to the following examples.)
