Argosy RW848, Руководство пользователя

Страница: 27 / 36

- 21 -
/P is used to set the I/O ports, and the valid numbers are 320, 340, and 360, and the default
setting is /P:320 .
/D is used to set the device name. It can be any name up to 8 characters. This name must be the
same as the name specified in the MSCDEX.EXE option /D: name in the next step.
4. Add the following line at the TOP of your AUTOEXEC.BAT:
drive:\path \MSCDEX.EXE /D:MSCD001 /M:4
Where drive:\path specifies the DOS directory or the directory containing the file
MSCDEX.EXE.
Note: If your AUTOEXEC.BAT file loads a menu program such as DOSSHELL or Windows, you
have to add the above line in front of your menu program. Otherwise, MSCDEX will not
have a chance to load before your menu program begins.
The example above shows the default setting. The /D: switch indicates the device name. It
MUST be the same name specified by the /D: switch of ARICDF.EXE in your CONFIG.SYS
file. The /M: switch indicates how much memory to allocate for caching information on the
DVD-ROM. The default /M:4 caches 8KB.
For more information about the switches of MSCDEX, please type ‘help MSCDEX’ at the DOS
prompt.
5. Now, reboot your computer to activate the external DVD-ROM drive.
Explanation Of The Error Messages
This section explains the most common error messages that DOS/Windows 3.1 users may encounter.
After rebooting your computer, the following messages will be displayed on your screen, which are
generated by ARICDF.EXE and MSCDEX.EXE.
Configure card to:
I/O Port: 320-32F
Device Name: MSCD001