Argosy RW848, Руководство пользователя

Страница: 10 / 36

- 4 -
HARDWARE INSTALLATION
Note:
♦
If you want to use an AC adapter to powers the external DVD-ROM, please use the AC adapter
provided by manufacturer, using an incorrect AC adapter could result in permanent and
unpredictable damage to the drive.
♦
This external DVD-ROM supports Hot Insert/Remove function only under Windows
95/98/Me/2000/XP, with the other operating systems, please insert the PC Card of interface
cable before power-on computer, and remove this card after power-off computer.
1. Insert the plug of the PCMCIA interface cable into the Interface Connector of drive. Press firmly
until the interface connector is seated correctly.
2. Make sure the Power Source Switch is at the correct position.
PC: get power from the PCMCIA socket of computer.
DC: get power from the AC adapter.
Note: If you are using an AC adapter to powers the external DVD-ROM, make sure the Power
Source Switch is at the ‘DC’ position, then connect the AC adapter to the Power Jack (DC
IN) of the drive, and attach the AC adapter to the outlet.
3. Place the DVD-ROM drive in the horizontal position. This drive is designed to operate only in the
horizontal position. Operating the DVD-ROM drive in any abnormal position is not recommended.
4. You are now ready to install the device drivers, please follow the related software installation guide
to install the device driver.