Argosy HV359, Руководство пользователя

Страница: 24 / 32

Using the AV Playback Function
20
original in progress recording task.)
Schedule
Before setting up a scheduled recording task, it is important to setup the time clock of this
device. (page 23)
Start Time: Start time of the scheduled recording task.
Length: Recording length of the task.
Repeat: Repeat event of the scheduled task.
Status: The status of the task
Note:
• The Status “ Ready ” means the scheduled task is ready. It does not imply
the input signal is present.
• A task must be set to start in at least 2 minutes from the current time.
• If two tasks overlap, the later will not start recording.
• Leave at least 1 minute between 2 adjacent tasks for the former to
complete writing on the HDD.
1. Select Add a new schedule and press the ENTER button on the remote control.
2. Use the buttons on the remote control to set the date and time you want
recording to start.
3. Use the buttons on the remote control to set the recording length in hours and
minutes.
4. If you want to record this program more than once, set the Repeat option you want to
use.
5. When you have finished setting up the record schedule, press the ENTER button on
the remote control and confirm the schedule.
6. 30 sec before the start time of a scheduled recording task, a dialogue box will inform you
to confirm the scheduled recording task.
Note:
•
If the power supply is disconnected from this device or there is a complete
power outage, it will erase the recording schedule and you will need to reset
the recording schedule when power is restored.
• After a new schedule is set, you can press the STANDBY button on
the remote control to enter standing by. The blue LED will remain on, with 2
blinks every 5 seconds, in this Scheduled recording standing by mode.
(page 4)
• When this device is off, scheduled recordings will be off.