Fit the drawers
Starting with the large
bottom drawer, slide
both the runners
forward and locate the
drawer sides
between them, lining up
the holes in the drawer
sides with the 2nd
'threaded' holes in the
runners .
Working from the inside
of the drawer, insert 2
screws through the
sides and out into the
2nd threaded hole in the
runner.
Note:
Do not over-
tighten the screws .
If they catch on the
runner you may need
to loosen them slightly.
Assembly Instructions
15
Step
28
Step
29
Secure unit to a wall
To prevent possible
overbalancing we
recommend that this unit
is secured to a suitable
wall by use of the metal
bracket fitted to the
top of the unit.
Fixings are not supplied
as they will need to suit
the wall type, and the
length of Screw will
depend on the distance
of the back of the Unit to
the wall.
Warning:
Take
care when
drilling the wall that you
do not drill into any
pipes, wires etc. If in
doubt, consult an expert.
C
5
C
WALL
WALL
Top of unit
5
C
5
L
R
R
L
2nd threaded
hole
R
L
L
L
