x
x
y
y
Assembly Instructions
14
Step
26
Fit the top
Lower the top down
onto the assembly.
Use a screwdriver to
tighten the 6 large
locking nuts fitted to
the left side , right
side and fly end .
Using 2 people,
carefully lay the unit
back down onto its
front edges.
5
E
1
2
3
3
1
2
5
Step
27
Fit the back
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the
outside edges of the
back .
Note:
Nails should
be spaced out evenly.
Using 2 people,
carefully stand the
unit up again.
16
D
16
Polystyrene
block
y
y
x
x
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
D
16
Warning:
The
unit is heavy.
Lift with care.
Warning:
The
unit is heavy.
Lift with care.
