Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
6
F73
F1004
COVERED EDGE
F73
COVERED EDGE
F73
COVERED EDGE
F73
COVERED EDGE
Use 2nd hole in from front of Runner F1004 to
fit 1st F73 then fit other F73 to match other hole.
Use 2nd hole in from front of Runner F1004 to
fit 1st F73 then fit other F73 to match other hole.
Use 3rd hole in from front of Runner F1004 to fit
1st F73 then fit other F73 to match other hole.
Use 3rd hole in from front of Runner F1004 to fit
1st F73 then fit other F73 to match other hole.
F1004
F1004
F1004
E
Step
4
A
Prepare the right side
a:
Place 3 x runners
on right side . Slide
back top of runner and
use 2nd hole from the
front to fit 1st screw .
b:
Slide runner back the
other way and use 2nd
hole from the back to fit
2nd screw .
c:
Insert 1 large locking
nut as shown.
Note:
Arrow on locking
nut
must
point towards
hole in edge of panel.
Tap in wooden dowel
as shown.
Note:
Wooden dowels
must not
stick out from
the edge by more than
10mm or they may
damage other panels.
2
L
K
K
a:
b:
E
Finished front edge
Finished front edge
K
L
K
L
K
L
K
L
Rebated
back edge
K
L
K
K
K
E
c:
E
10mm
A
2
2
2
Finished front edge
A
