Argos Rogerblack Fitness 759/9583, Сборка и инструкция пользователя

Страница: 27 / 32

24
Symptom Cause and Check Solution
E00 Safety Key not in the position Re-locate the safety key in the correct position
E01
No signal to Controller from
console
A: Check the Main Controller Wire
B: Replace the PCB Board
E02 Motor communication error
A: Check the wire from motor to controller
B: IGBT breakdown, Replace the controller
C: Check the power voltage if 50% lower than rate
voltage
D: repace the motor wire or change motor
E04 Incline Motor communication error A: Check the wire from incline motor to controller
B: Replace the incline motor
C: Replace the controller
E05 Over current protector A: Over loading or over resistance, restart the treadmill
B: Transmission parts seized up, check the parts
C: Replace controller
D: Motor breakdown, change the motor
E06 Motor Open Circuit Connect the Motor link
E08 IC Driver Error Replace the IC driver or change the IC driver
E09 Folding up protect A: Do not fold up the running deck when treadmill in is
running
B: If the running deck in laying position and show E09,
you need change the contoller
E10 Motor instantaneous current
abnormal
A: Adjust the torsion potentiometer of the Controller to
lower
B: Motor Breakdown, change the motor
E11 Over voltage protector Voltage over 270v (for 220v) or 150v (for 110v) -- turn off
the treadmill and check the power source
E13 No singnal to console from
Controller
A: Check the Main Controller Wire
B: Change the controller
E14 Lower voltage protector Voltage lower than 160v (220v) or 70v (110v) -- turn off
the treadmill and check the power source
Care and Maintenance
Trouble Shooting