Assembly Instructions
13
Step
18
Make sure that the plastic
sleeve is fully pushed
onto the shelf stud.
L
Fit the centre door
and its handle
Note:
The easiest way to
attach the centre door
. is to fit the top hinge
first, then align and fit the
other hinges.
a:
Push the hinge
onto the front part of the
hinge plate .
The recess at the bottom
of screw B goes into the
slot in the hinge plate.
b:
Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The hinge must be
flat against the hinge
plate prior to any
adjustment.
d:
The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
hinge plate and the hinge
would not be secure.
Remove the hinge from
the hinge plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a handle to
the centre door using
2 screws .
Note:
Do not
overtighten screw .
N
N
N
M
M
M
N
M
J
E
E
9
9
a:
b:
c:
d:
M
N
M
M
B
M
N
N
N
A
N
M
B
e:
J
E
E
9
