Argos Mirrored Cabinet, Простая инструкция по сборке

Страница: 2 / 22

Assembly Instructions
Fitting the Support Frame
NOTE: It would be useful to ask someone 6. Fit the curving hinges (P) into the pilot holes
to help you to assemble this unit. of left internal panel(C) to attach the middle
door (J) with hinge screws (O).
1. Attach the side panel(A&B) and internal (See Fig. 5)
panel (C&D) to base panel (G) with
assembly screw (T). 7. Attach the triangle boards (Q) to the
(See Fig. 1) corners of back panel, securing it with glue
(not provided) (See Fig. 6)
Ensure that the grooves in the side panels Ensure the holes in triangle boards are in
face inwards and are aligned with the line with those in the back panel.
groove in the base panel.
8. Select a suitable location against a wall to
2. Insert the back panel (H) by sliding it into fix the cabinet onto the wall using the
the grooves of the side panels screws provided. Mark the position for the
(See Fig. 2) screw fixings through the four fixing
holes in the cabinet back. Drill the fixing
Ensure that the laminated white surface holes in the wall and insert the wall plugs
is facing inwards and the holes are (R). Hold the cabinet over the drilled holes
positioned as shown. and fit the wall screws (S) into the wall plugs
through the cabinet back (See Fig. 7.)
3. Attach the top panel (F) to assemble the
frame, using screws (T) (See Fig. 3). 9. After wall mounting the cabinet, fit the shelf
supports (M) into the holes on each side of
Make sure that the back panel is located cabinet and place the S&L shelf (E1&E2)
properly in the groove in the top panel onto the supports (See Fig. 7).
before tightening the screws.
Care and Maintenance
4. Insert the screw caps (L) over the holes in
SAFETY
those frame panels. To avoid any risk of suffocation to animals or children dispose of the plastic bags
immediately.
5. Fit the straight hinges (N) into the pilot holes
CLEANING
of side panels(A&B) to attach the door As with all surfaces clean with a damp cloth and mild detergent,do not use bleach or
panels (I&K) with hinge screws (O). abrasive products.
(See Fig. 4)
FITTING
From time to time please ensure there are no loose screws on the product.
Fig. 5
Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 6
Fig. 7