Argos Malibu 553/4038 Скачать руководство пользователя страница 2

Страница: 2 / 32

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

•

Warning: This unit weighs

approximately 102kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2, 3, 4 and 5.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers

for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

•

Safety note: To prevent

possible overbalancing this unit

must be secured to a wall

using the 2 overbalance

protector kits supplied or, an

alternative fixing method of your

choice.

• Dispose of all packaging

carefully and responsibly.

When applicable, remove any protective film

from the panels before they are used

Содержание Malibu 553/4038

































Результаты поиска

Содержание Malibu 553/4038

Отзывы:

Бренды по названию

Популярные бренды

Argos Malibu 553/4038, Руководство по сборке

Результаты поиска

Содержание Malibu 553/4038

Отзывы:

Бренды по названию

Популярные бренды