1
Safety and Care Advice
IMPORTANT –
READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
components and tools listed on
pages 2 and 3.
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers
for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do not use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Note:
this could cause damage.
Do not stand on the product,
Keep These Instructions For Future Reference
This product complies with
EN 747-1:2007
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
All assembly fastenings
should always be tightened
properly and that care should
be taken that no fittings are
loose.
The bunk bed or high bed
should not be used if any
structural part is broken or
missing.
The high beds and the upper
bed of bunk beds are not
suitable for children under six
years due to the risk of injury
from falls.
Children can strangle in
items such as ropes, strings,
cords, harnesses and belts
attached to or hung on a bunk
bed/ high bed.
Recommended size of the
mattress(es):
W75 x L175 x D18cm.
Warning: “Children can
become trapped between the
bed and the wall. To avoid risk
of serious injury the distance
between the top safety barrier
and the wall shall not exceed
75 mm or shall be more than
230mm”.
