With clean movements bring
the back cushions of the chair
back to their original shape.
Spread the leather evenly across
the seat cushions with the palms
of your hands
Give the arm pads a good plump
and then straighten them as
shown.
• Remove the protective cellopance
wrapping the sofa. Do not use sharp
tools that may damage the sofa covering.
• Feet and accesories can be found by
opening the zip underneath the sofa. To
access this zip spread the cellophane
sheet on the floor, lower the sofa so that
the rear back panel rests against the
floor. Remove package containing the
feet and accesories, then install the feet.
Before your furniture leaves the factory, it is given a final inspection prior to secure wrapping for
distribution. Due to tight and secure wrapping to minimise movement during transit, when unwrapped, the
chair may appear a little "distressed". This is entirely normal, and the illustrations below show how to
rectify this in 3 easy steps:
Step 1
Step 2
Step 3
• Assemble on a soft level surface to
avoid damaging the sofa or your floor.
• Dispose of all packaging carefully and
responsibly.
• Parts of the assembly will be easier with
2 people.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Make sure you have enough space to
work and layout the sofa.
• Once feet are securly attached return
the sofa to an upright position. To do this
the sofa must be lifted and turned. Avoid
using the feet as a lever as doing this
may lead to damage.
• Assemble the sofa as close to its final
position (in the same room) as possible.
1
Issue 1 - 28.11.2013
