w w w . a r g o n a u d i o . c o m
iNet6+
13
3. Getting started/setup
Although the Frontier Silicon Argon iNet6+ is sophisticated, getting started is simple. To play DAB or FM radio, all
you need is a power source (a 100-240 V mains supply).
For Music Player mode, you need a wired/wireless Ethernet network and a UPnP music server (e.g. a PC).
For Internet-connected modes such as Internet radio or Pandora, you also need a broadband Internet
connection.
To set up the Argon iNet6+:
1. Place Argon iNet6+ on a suitable shelf or table
2. Connect the power adaptor between Argon iNet6+ and the mains supply.
3. To receive broadcast radio (DAB and FM), connect an antenna cable.
The setup wizard starts.
3.1 Setup wizard
When Argon iNet6+ is started for the first time, it runs through a
setup wizard to configure settings for date/time and network. Once
this has finished, the system is ready to use in most modes.
Note: To change these settings later, select
Menu >
System
settings >. To run the setup wizard again, select
Menu >
System settings > Setup wizard
.
