w w w . a r g o n a u d i o . c o m 9
7460
/
50A
Use of analogue audio connection
7460A/7450A back panel cut out
What not to do when connecting a Source input to your
Argon 7460A/7450A
Do not use a combined RCA and Mini-Jack (3,5mm) cable!
Often you will see a cable that has mini-jack at one end and
two RCA plugs at the other end. The cable will work but the
input sensitivity of mini-jack and RCA are quite different.
This will result in the Argon 7460A/7450A playing too low
volume. Use only cables with identical plug types at both
ends.
Connections explained
Analogue audio connections
Your Argon 7460A/7450A is equipped with 3 different
analogue audio input types. In this section we will explain
you how and when to use the different inputs. The 3
different connection types are show on the above drawing
as no. 1-3
Note that most new TV remotes can control the Argon
7460A/7450A active speaker volume if connected to
variable TV audio out.
*1 is standard left/right RCA to use typically with a DVD
player, CD player or normal Hi-Fi audio source component
*2 is mini-jack 3,5mm stereo input. Typically for use with
connecting a iPod, Mp3 Player, PC or TV
*3 is a not so used standard called ¼”TRS. It’s usage is
primarily for Professional Audio use as its makes it easy
and safe to plug and unplug the connectors often.
And, once again remember to use analogue audio connect
cables with same type plugs at both ends