Argon 18 E-Gravel Скачать руководство пользователя страница 6

2

For your safety

This operating manual assumes that you have a 

basic knowledge of riding pedelecs/bicycles. It will 

not teach you how to ride a pedelec/bicycle. Like-

wise, it does not explain how to assemble or repair 

the pedelec.

Always be aware that pedelecs may give rise to 

risks, especially to riders themselves. Always be 

aware that you are not as protected as you are in 

a car, for example. Pedelecs have no airbag and 

no body. Nevertheless, you are faster and can ride 

on other areas of the road compared to a pedestri-

an. Pay particular attention to others on the road.

Never ride with headphones. Never use your 

phone while riding. Never cycle if you are unable 

to control your bike completely. Under no circum-

stances should you ride your bike if you have tak-

en medicine or are under the influence of alcohol 

or drugs.

•  Under wet and slippery con-

ditions, adapt how you cycle 

accordingly. In this case, 

you should ride more slowly 

and brake earlier and more 

gradually, as the braking 

distance becomes significantly longer.

•  Ride at an appropriate speed for the terrain 

and your riding capabilities.

Before the first ride

Please consult the operating manu-

als of the individual component man-

ufacturers, which were supplied with 

your pedelec or may in some cases be found 

online.

Electrical 

motor

Gears

Your specialist pedelec retailer will be happy 

to answer any further questions you have after 

reading this manual.

Ensure that the pedelec is ready for use and ad-

justed to fit your body.

This means: 

•  Checking the position and attachment of the 

saddle and handlebar

•  Mounting and adjusting the brakes

•  Making sure the brake handles are easily ac-

cessible (see page 21) 

•  Fastening the wheels securely onto the frame 

and the fork

• 

Checking the battery is firmly fastened

• 

Ensuring the battery is sufficiently charged for 

the planned trip

•  Familiarising yourself with how the pedelec 

should be used

To ensure that you enjoy a safe and comfortable 

riding position, please allow your specialist retail-

er to set up your handlebars and stem. Adjust the 

saddle to find a safe and comfortable position for 

you (see page 19).

Allow your specialist retailer to set up the brakes 

so that the brake levers are always within easy 

reach.

Ensure that you know which lever operates which 

brake (i.e. left or right, and front or back).

Usually, the right brake lever operates the rear 

wheel brake and the left brake lever operates the 

front wheel brake.

Despite this general rule, however, you should 

still check which wheels the brakes are connect-

ed to since this standard isn’t always followed.

Modern braking systems might be 

more powerful or have a different 

functionality than those that you are 

used to. Practice operating the brakes in a 

safe  area  without  traffic  before  you  start  a 

journey. 

If  you  use  a  pedelec  with  carbon  fibre 

wheels, please note that this material pro-

vides a significantly weaker braking effect in 

combination with rim brakes than aluminium 

rims do! 

Also remember that the effectiveness of 

brakes can be different to what you are used 

to in wet conditions or on slippery surfaces. 

Adapt the way you cycle for slippery surfac-

es with possibly longer braking distances.

Содержание E-Gravel































































Отзывы: