Argo EVAN PLUS Скачать руководство пользователя страница 8

 

V 01/22

 

27

USE WITH END FITTING FOR WINDOW 

 

 
 
 

Connect the flat fitting to the hose, extend the hose as far as 
necessary for reaching the outside and it connect to the back 
of the air conditioner. 

 

 

Connect the round window fitting (1) to the end of the hose 
then the end fitting for the window (2) 

 

 
 
 
Open the windows and lock one of the two leaves with 
the handle.  
Place the end fitting against the fixed leaf of the window, 
and draw the other leaf towards it. 

 

 

USE WITH WINDOW KIT 

1.  To make the hole in the glass it is advisable to take 

the porthole kit accessory to the glazier. 

 

2. Insert the window unit  (B) into the window. 

 

 

 

3. Insert the round fitting (A) into the retractable flexible pipe 
and insert the latter with its round fitting into the window unit 
without the plug. 

 

 

4. If the air conditioner is not used for prolonged periods, 
disconnect the pipe and plug the window unit. 

 

 

Connect the power cord to a suitable electric socket (220–240 V). Insert the supplied batteries into the remote control and 
make sure the poles match. Select the desired operating mode from the remote control. 
 
 
 

Содержание EVAN PLUS




















Отзывы: